If you have seen the BUGCODE_NDIS_DRIVER error with aBSOD, it is a driver problem.
Most of the times, it comes during Windows 10 installation when Wi-Fi option is enabled in the BIOS.
You may see several results likecomputer restartdue to this error code.
Typical BUGCODE_NDIS_DRIVER error as reported on Reddit forum.
The BUGCODE_NDIS_DRIVER error usually due to faulty driver updates.
The error can be triggered by connection drivers.
Initially you’re able to disable Wi-Fi and Bluetooth options in your BIOS.
BSOD screen after BUGCODE_NDIS_DRIVER error
Related
Multi-cores in your processor can also be problem.
After installation you might re-fire up the Wi-Fi driver.
For many laptops, Wi-Fi web connection driver is very important.
This is because, they dont have wired connection.
Many-a-times, you could see this error in ACER motherboards.
Windows 10 doesnt have the proper Intel chipset drivers for in-built Wi-Fi LAN.
ASUS manual to disable Intel 9260 Wi-Fi drivers
you could easily revamp your Intel drivers by searching from Windows Updates.
TP-Link adapters Generally, TP-Link provides routers and Wi-Fi extenders for web link usage.
These can be a source of BUGCODE_NDIS_DRIVER error.
you might either remove them from your configuration or disable in BIOS.
Then you might update to their latest version.
you could also use an alternate VPN client.
BSOD Cause: This can occur during preparing devices segment of starting Windows 10 for the first time.
Since your end result BUGCODE_NDIS_DRIVER error can be a blue screen of death.
you might try remedial measures that can remove BSOD errors.
This can be done in the UEFI setup of your BIOS.
Generally, it can be seen in the Onboard Devices configuration.
There, you might shut down the Wireless LAN option.
These versions can have faulty web link drivers also.
So better roll out the older version of 1503 or 1603 or 1709.
Then update to the latest version.
This error is also found in Windows 10 1809 version.
This can be due to Intel 9260 Wi-Fi module.
you’re free to use an updated chip driver for Intel 9260 chip.
If it doesnt work out, it’s possible for you to roll back to the original version.
Then you’re gonna wanna shut down the LAN ports of both wired and wi-fi networks.
This can cause problem during first time installation.
Disconnect your Wi-Fi devices also from the computer.
This includes Wi-Fi antennas and routers.
Then you could re-enable them again, after installation is complete.
You will end up in a never-ending booting cycle.
You will get past the installation phase.
But blue screens error alert shows with STOPCODE BUGCODE NDIS DRIVER.
you could allow only mouse and keyboard to be attached.
This means you might deactivate or disconnect the following devices.
The Media Creation Tool that comes on the original Microsoft site, might have problem.
So you’re free to download the .ISO image to your hard-disk.
Then use the flash disk or thumb drive or USB to make a Windows 10 installation media.
you could then install your Windows 10 from this USB drive.
Some people had problem with M.2 interface.
you’re able to either use the normal SSD interface or a normal HDD.
This can also handle the BUGCODE_NDIS_DRIVER error.
It comes under the hardware configuration cause.
