It also includes information for dry mounting or wet mounting a replacement protector.
These instructions apply to most screen protectors on any smartphone or tablet, including iPhone and Android.
Many users are wary of removing the old screen protector themselves, but the process is simple.
Amazon
Don’t overdo it.
Be gentle and use a low heat setting.
Gently have a go at lift the screen protector from each corner using your fingernail.
One corner should be loose enough to give you something to work with.
Once a corner is loose, pull up gently from the corner.
Begin peeling the protector up along its sides.
This will keep it stable and help prevent it from breaking apart before you could get it completely off.
Go slowly as you do this to keep the screen protector in one piece.
Use a toothpick to gently pry up the screen protector at one of the corners.
If one corner isn’t coming loose, try another.
Once a corner is loosened, use your fingers to gently pull it up and away from the phone.
Begin peeling the protector up along the sides.
Go slowly, as you don’t want to rush the job and tear your screen protector into pieces.
Slide a credit card into the gap to gently lift the screen protector off the phone.
verify your hands are clean, and gentlyclean your phone’s screenwith a microfiber cloth or appropriate screen cleaner.
If your screen protector didn’t come with any special solution, use the dry mounting method.
If it did, use the wet mounting method.
Dry Mounting a Screen Protector
Peel the film from the screen protector’s sticky side.
Take the film off the top of your screen protector.
You should see a clean surface.
Wet Mounting a Screen Protector
Some screen protectors come with a special solution to use during app.
Only use the solution that came with your specific brand of screen protector.
Spray the special solution on the front and back of the screen protector.
This will keep it moist during the installation process.
Use the squeegee that came with your kit to squeeze the excess solution out from under the screen protector.
Start in the center, then gently push it out toward the edges.
Hold firmly onto the protector so it doesn’t move around.
Clean Magic Eraserwill do the trick.
