The best way toreconnect USB drive without unpluggingit is to just enable and disable it a couple of times.

There are a lot of problems when youdisconnect flash drivefrom yourWindows 10 computer.

But whenfiles/foldersare in the process of copying, unplugging is not a good idea.

The machine may fail.

In many cases using the safety feature is a good idea.It also powers off the rig.

Safely Remove Hardware NOT required in Windows 10

Remove your phone or camera connected through USB.

You are NOT most likely to see a warning.

As you know that when an USB unit is removed you are to plug it back again.

This causes a lot of wear and tear.

Microsoft seems to know this, and the annoyance that the option causes.

Sometimes I get an error This gadget is currently in use.

Files may be open or some process may be running.

Even without any issue thiskind of errorcrops up.

In another guide, we are going to see the solution for this error.

The best way is always tokeep your hardware rig connected.

Since keeping the power on your USB external DISKheats it up, its better to unmount.

Then, when required you’re able to re-connect it.

In the search box, pop in machine Manger or just a few words it.

In the list of search items, you’re free to click it.

Also, it is available in the Control Panel.

In this tutorial we are going to seeHow to re-connect USB without Unplugging it.

Otherwise, you may face discomfort to do it several times.

In this guide, we shall remove this inconvenience.

Just sit where you are.

Disconnect and Remount without unplugging it.

Total Time:2 minutes

Open your rig Manager

This can be done using several methods as mentioned above.

Remove any of the unit and other things.

This control panel item is best way to control your devices.

A Code 47 error is displayed when you DO NOT unplug your unit.

Typically you would see something like this USB Attached SCSI (UAS) Mass Storage machine.

Right tap the machine and choose Disable machine.

This can also be done, by clicking the down arrow at the top.

A typical message like Disabling this machine will cause it stop functioning.

Do you really want to disable it.

Right-smack the rig and hit Enable rig

You may be asked to restart the computer.

punch No and ignore the message.

you’re able to pick the green Up icon at the top also.

The yellow exclamation mark should turn todown icon.

Repeat the same procedure again.

This will regain your USB external storage unit.

You should see the devices in your File Explorer.

Otherwise, they will start working again.

it’s possible for you to use it on 32-bit or 64-bit OS like Windows 7 and XP.

Right-tap the machine in the machine Manager and click onProperties.

A pop-up dialog box opens.

Note the property value of gadget Instance Path.

Since devcon utility is deprecated, we can use the latest in-built utility.

ThePnPUtilcommand does a better job of removing the equipment and then scan all the hardware drivers.

This is available from 2004 version and later.

To remount the gadget, you’re able to just do a scan .

If there is any problem, check your gear manager.

You should see a warning symbol on that rig.

Then, you might uninstall the gadget and scan for hardware changes.

This should reconnect your USB again.

It applies to your flash drive and external hard-disk.

Then you see an yellow exclamation mark on the USB in your machine manager.

Disable it, Enable it.

Ignore any restart or other warnings.

Repeat the process again.

This should remount your USB rig safely.

If any problem occurs, just unplug it and re-plug it again.