When this error occurs, your machine will typically compile some diagnostic data then reset.
If the root problem persists, your rig will eventually crash again with the same WHEA uncorrectable glitch notice.
However, the best place to start is on the software end because that’s easier and less expensive.
Use Windows Update to verify that your system is up to date.
If you require any updates, you’ll have the option to install them.
you might also selectCheck for updatesto be sure.
Physically inspect your setup hardware.
You may have a physical defect or failure in one of your hardware components.
Don’t touch anything inside your box unless you’re using an anti-static bracelet.
check that your drivers are up to date.
Driver conflicts represent one of the most common causes of the WHEA uncorrectable error.
Use thislist of free driver updater toolsfor some much-needed assistance.
Use System Restore to undo any recent changes to your rig.
Check for hard drive issues with the Error Checking utility.
you could also usechkdskif you prefer.
Use a free memory diagnostic tool.
If one of these tools says you have bad memory,replacing your RAMmay eliminate your WHEA uncorrectable error.
Disable overclocking in BIOS or UEFI.
The restart process will start.
SelectTroubleshoot>Advanced options>UEFI Firmware tweaks.
If your rig uses BIOS instead of UEFI, these options will be slightly different.
your system will restart and automatically open UEFI or BIOS.
Navigate to the overclocking section, and disable all overclocking.
This fix only applies if your system has been overclocked.
If you bought your system new and never overclocked it, this fix doesn’t apply.
Reset Windows as a last resort.
When all else fails, reset Windows.
It’s an irreversible process that essentially reinstalls Windows from scratch and gives you a clean slate.
If you reset Windows and still experience the WHEA uncorrectable error, you have a hardware issue.
We also have a generalguide to fixing the blue screen of deaththat may be some assistance.
FAQ
You’ll need toboot into safe modeand use the Windows log to find a faulty driver.
PressWindows key + Rand typeeventvwrin theRundialog box.
In theWindows Logsmenu, selectSystem.
Find a log labeledsystem_thread_exception_not_handled, a nd select it to find the faulty driver.
Turn onSet Time Automatically.
In older Windows versions, choose thedate and timeon the taskbar and selectInternet Time>Change controls.
CheckSynchronize with an Internet time serverand selecttime.windows.com>UpdateNow>OK.
Tofix error 0x80004005 in Windows 10, tryrunning the Windows Update troubleshooter.
you could also try deleting temporary files, disabling Windows Defender, and disabling Outlook mail notifications.
